Squeal Out Anti-Squeal Disc Brake Paste – Brake Lubricant & Rotors Lube, Stops Squeal for Brakes, 3 oz Jar

Amazing job getting my rotors cleaned. Had a stubborn rotor always squealing even after light sanding and alcohol passes. Used product and the amount of dirt, grime came out was crazy, my towel was dirty. Brake performance much improved and after few rides, still no squealing.

Works for awhile

Works very well. I applied the product on my Pinarello Ultegra DI2 disc. The breaks went from obnoxiously squealing to completely quiet. The only reason I gave it 4 stars is because I had a little bit of a scraping noise like the rotor was rubbing for the first 50 miles. Breaking strength seemed to be the same and never reduced after directions were throughly followed. I RIDE THIS BIKE LIKE I STOLE IT! Don’t be nervous it’s going to ruin anything.

I'm not as impressed as others seem to be. It works ok I guess but did not completely eliminate my squeal. I think you can achieve similar results just by cleaning with isopropyl and resurfacing with sandpaper. Using this product, you still have to take the pads out to clean the paste off properly so it doesn't save you any time or effort. At $30 it is very expensive (although a jar will last a very long time).

If you've found this product, you're likely at your wits end with brake noise on your bike and have scoured the depths of the internet for a solution. I don't think this company is still in business, but man - This stuff works. Buy it. I rage bought new rotors and pads after my last ride - but saw this stuff and figured I'd give it a shot before installing the new parts. One round with this stuff and my bike is blissfully back to silence when braking, and I'm returning the pads and rotors. Will it last? Can't tell yet. But with how easy it was to apply and clean off, if I have to do this regularly it's not the end of the world. It's pricey, but way cheaper than new parts. You only use a little of the paste at a time; this container will last longer than your bike does.

I assembled my F10Disc Pinarello with SRAM AXS hydraulic brakes on Shimano 160mm discs. After multiple attempts at proper brake bed-in process they continued to squeak and grate. It was really frustrating on this high end a bike. I was about to just buy new pads and rotors and start over when someone suggested I try this product. Have to admit I was skeptical. One application and the braking is perfect. Quiet and solid. Follow the instructions carefully. You will not have any braking power while the stuff is doing it's magic, so do one brake at a time and use level ground to ride it in on. Carefully removing the remaining goo from the rotor and pads was the hardest part. It's now been 2 months and the brakes continue to work perfectly. I'm a convert to PV BIKE WORKS Squeal Out and highly recommend it.

If you’re going to apply this product to your bike’s brake rotors, I strongly recommend doing it twice. Start by applying the first coat, making sure to rub down both sides of the rotors. Then, go back and do a second coat the same way, again covering both sides before washing it off. Just a heads-up: this material is very hard to remove. I had to rinse the rotors with water using a hose, then wipe them down with a cloth. After that, I dried them and did a final clean with isopropyl alcohol before drying them again. So far, it worked for a few rides then then stopped working entirely. The squeaky brakes are back. Since it's hard to get off, I probably won't try again.

Great product! Saw this on YouTube, figured it might be too good to be true- wrong!! Works great, easy to use, no more squealing!