MagSafe Vent Mount Pro - for Car, Magnetic Phone Holder Compatible with iPhone 16, 15, 14, 13, & 12 Series - Grey

The Belkin BoostCharge Pro Magnetic Wireless Car Charger is honestly a must-have for anyone who drives and needs to keep their iPhone charged. It works with MagSafe, so your phone clicks into place easily and stays secure, even on bumpy roads. The charging speed is solid, offering 15W of power, and you don’t have to worry about taking off your case—it charges right through it. The 5ft USB-C cable gives you enough length to install it however you like in your car. It’s super straightforward to use—just set your phone on the mount, and you're good to go. The magnetic connection holds it firm, whether you have it in portrait or landscape mode. The whole setup is quick, efficient, and keeps your phone charged while you’re on the move. Overall, if you're looking for a reliable and easy-to-use car charger, this one’s definitely worth considering.

Perfect car wireless MagSafe phone charger does the job

Thought at the time this was a bit expensive charger.But after getting it and fitting it into car found out why.It holds the phone really tightly and the magnet strength is great.It charges well and looks good in the car.

Cons: USB-C cigarette lighter adaptor NOT included. Cable connection is integral and not replaceable. Pros: MagSafe connection holds well with official Apple MagSafe case. Overall: good product with 2025 apple phones but limited future proofing options.

This magnetic phone car charger is superb. The magnets are really strong and the iPhone stays in place even if there’s bumps in the road and lots of car movement. The charger works efficiently and quickly

Pictures show audi interior vents, however this doesn't work on the vents, when you pull your phone of, the holder comes off with it. It's constantly shakes while driving. It states it's mag safe but that is false advertising. As mag safe cases magnit is too strong, that's why it pulls of when trying to pull your phone of it. Not compatible with audi interior even though the video and pictures show they've tested it in an audi A4 and a5 b9 interior. The clamp is too long to fully fit on the vent. So more false info there. 60 pound. Overpriced. It' feels like a budget product sold at a high quility price. People said that you can remove the wire on the holder but you cant. There is nothing good about this.

I’ve used other iPhone holders before and have found this one to be the most secure one so far. Well constructed and swiftly delivered, well worth the cost.

This is a well engineered piece of kit. It holds the phone securely in place, easily clips on to the air vent and the charger is long enough to reach the lighter charger in the car

Excelente produto, pena que não carrega o celular

I was looking for a simple, kind of modern-looking, yet durable MagSafe phone mount for an iPhone, mainly while teaching a teenager how to drive and to not touch his phone - it's in your line of sight, you will live for 20 minutes of no interaction LOL (and also got it for me, I mean it's my car). It magnetizes to both my MagSafe phone case and MagSafe socket, and the strength is pretty darn good. Every time I remove my phone, the socket is still left on the Belkin. I had both this non-charging Belkin and the charging Belkin that I was looking into. I saw reviews of the other Belkin wireless car charger but the reviews weren't really too positive as far as charging goes and stated that the charge wasn't that great or it didn't charge quickly or it eventually lost charge completely. I already have phone cords in my vehicle so TBH that wasn't really a feature I needed - I just needed a phone mount that I didn't have to un/screw into my air vents, didn't have four sides to it that had to hold your phone in place, was plastic & cheap - I wanted MagSafe only. I also did not want a mount with any sticky stuff that goes on your window or your dashboard. I'm a simple kinda gal. I want simple stuff. Belkin delivered. The size was discreet, although having an air vent mount will always block some portion of your air/air vent, that is expected and I'm totally fine with that. Belkin has a shorter top area and a longer bottom so it succeeded in not blocking my air vent too bad (which are vertical). If anything, the position of the MagSafe on my phone is what made the phone block the air/vent. The gray prongs that go into your vent.... Now, I was going to give this one star off but changed my mind (really should only be a half of a star) and not because I'm disappointed with the product itself or because of Belkin's design flaws per se. So, the gray prong that goes into your vent is silicone. That part is fantastic! No slipping at all while driving. The only time the prongs come off the vent is when I try to pull my phone off the mount too hard when I'm getting out/done, if I pull my phone to the side/in a sideways manner, the mount stays in place. They made the prongs a little too short. It would probably help just a little if the prongs were a tad bit longer, but I can understand why they didn't risk that because some vehicles have air vents with shorter panels and some with longer so it's better to just fit all vehicles by making the prongs short, I guess. The prongs are attached to what I call a rotator cuff (yes, it was fitting to give that name). That rotator cuff obviously moves in a circular motion but it sure as heck needs some WD40 because when I try to adjust the Belkin to accomodoate my air flow, the rotator cuff will sometimes not move and the prongs just remove themselves from the air vent. Did that make sense? You see why I was interested in longer prongs? Maybe that would have helped. Maybe not. I can still move the rotator cuff but in doing so, I have to push the Belkin into the vent and then adjust the position. Hope that was easy to understand. That was really the only issue I had with it, but nonetheless, it is a such a great product, I am a happy customer that I found Belkin (no idea why I settled on cheap flimsy options before a review of another product brought me to Belkin's page) but hey... I will definitely be a returning customer.

ルーバーの取り付けも緩くないし、引っ付く力もちゃんとあるし、iPhoneの重さで傾いたりもしません。 買った甲斐がありました。

The charger is amazingly good and strong it keeps the phone locked in place even going though speed bump due this charger now my phone is always charged

◼️ DESCRIPCIÓN Se trata de un cargador magnético. El cargador está diseñado para el coche, es compatible con MagSafe y algunos modelos de iPhone. El producto es de la marca o tienda Belkin. ◼️ ASPECTOS POSITIVOS ● Tamaño: En primer lugar, el producto mide 5,9 cm de ancho, mide 8,5 cm de largo y tiene una profundidad de 6,9 cm. Así entonces, contamos con un producto que no es muy grueso y es portátil. Por lo tanto, podemos llevar o transportar el producto junto a nosotros, ya que no ocupa mucho espacio y es bastante ligero. ● Diseño: Por un lado, considero que el artículo cuenta con un diseño muy simple, funcional y ciertamente elegante. Este cargador magnético para coche ha sido diseñado con una correa y una agarradera muy prácticas que nos permiten mantenerlo todo recogido y libre de enredos. ● Montaje: El módulo MagSafe garantiza una alineación precisa y un emplazamiento fácil. La base se acopla firmemente mediante su mecanismo de pinza a la rejilla de ventilación para que tu móvil permanezca seguro. También cuenta con una rotación sencilla, coloca el iPhone en posición vertical, ideal para cargarlo, escuchar música y hacer llamadas con manos libres o en posición horizontal, ideal para usar aplicaciones de navegación. ● Compatibilidad: El producto es compatible con algunos modelos de iPhone. Además, cabe mencionar que es combatible con la mayoría de fundas que cuenten con MagSafe. Por lo tanto, el teléfono puede cargarse de forma segura a través de fundas de un grosor máximo de 3 mm. Así entonces, no hace falta sacar el móvil de la funda. ● Carga rápida: El producto cuenta con carga rápida. En primer lugar, deberemos colocar el iPhone en la superficie de carga y podremos cargarlo por carga rápida con hasta 15 W. Por lo tanto, podremos obtener una carga inalámbrica de hasta dos veces más veloz. Considero que es un aspecto positivo contar con carga rápida. ● Seguridad: Un aspecto muy importante del uso de productos de tecnología como estos es la seguridad. En primer lugar, el producto cuenta con monitorización de la temperatura. En segundo lugar, cuenta con detección de potencia, de cortocircuitos, de sobrecargas. También cuenta con protección contra los excesos del voltaje. Podemos utilizar el producto con tranquilidad. ● Calidad: La calidad del producto es muy buena. En primer lugar, el producto es muy útil o funcional. Además, tiene un diseño muy simple y minimalista. En segundo lugar, es compatible con varios modelos de iPhone y también con las carcasas o fundas que cuentan con el sistema MagSafe. Considero que se trata de una buena opción para el coche. ● Relación calidad-precio: El precio del producto es de 59,19 €. Considero que es un precio adecuado en relación con la calidad del producto. ◼️ ASPECTOS NEGATIVOS No tiene aspectos negativos. ◼️ VALORACIÓN GENERAL | ★★★★★ Se trata de un cargador magnético. El producto mide 5,9 cm de ancho, mide 8,5 cm de largo y tiene una profundidad de 6,9 cm. Así entonces, contamos con un producto que no es muy grueso y es portátil. El módulo MagSafe garantiza una alineación precisa y un emplazamiento fácil. La base se acopla firmemente mediante su mecanismo de pinza a la rejilla de ventilación para que tu móvil permanezca seguro. El producto es compatible con algunos modelos de iPhone. Además, cabe mencionar que es combatible con la mayoría de fundas que cuenten con MagSafe. El producto cuenta con carga rápida. La calidad del producto es muy buena. Para concluir, recomiendo comprar el producto.